捕鱼大作战

13436078993

Contact us

13436078993

Shandong Industrial Park, Geleshan Town, Shapingba District, Chongqing

Process control method of FRP open storage tank

Views: 0 Updated: 2019/6/20 10:05:00 Publisher: admin

(1) Control the viscosity of the glue solution Before the resin glue solution is harmonized, heat the resin to reduce the resin viscosity.This method can not only improve the moisturization of the glue fiber to the adhesive fiber, but also strengthen the activity of the resin glue solution. The remaining resin glue migrates outside the workpiece. FRP pipe is a lightweight, high-strength, non-metallic pipe that is resistant to decay. It is a glass fiber with a resin-based weight that is entangled layer by layer around the modified core mold according to the process, and the quartz sand is evenly spread over the distance between the fibers as an interlayer. The fiberglass pipe has a reasonable predecessor for its wall structure, which can give full play to the infection of the material. Under the premise of contented use of strength, it advances the steel and guarantees the stability and reliability of the product.

(2) Resin glue adhered to the workpiece outside the paste process must be scraped off layer by layer with the glue scraping target to avoid the wall thickness of the glass-reinforced steel open storage tank due to the glue remaining.

(3) Controlling the fiber pasting tensionIn order to control the deformation of the glass fiber reinforced plastic open storage tank, although the method of care is adopted in the layered structure, the influence of the entanglement tension on the deformation of the glass fiber reinforced plastic open storage tank is still neglected; in In actual operation control, a stepwise decreasing method is adopted for the tension around the entangled fibers. The glass reinforced septic tank is a device specially made for treating daily sewage, which is made of synthetic resin as the matrix and glass fiber reinforced material.

(4) After curing, the outer glue layer is removed.Of course, the glue solution control has been strengthened during the manufacturing process of the glass fiber reinforced steel open storage tank sample. However, during the curing process, the resin glue solution will migrate to the outside of the workpiece. Resin-rich layer. In order to remove the outer resin-rich layer, after the entanglement is interrupted, the glass reinforced septic tank is a device made of synthetic resin as the base and made of glass fiber reinforced material, which is specially used to treat domestic sewage.

Wrap the rag skin around the outer bread. After curing, the rag skin and the resin-rich layer on the outside are jointed and dropped. The origin of the glass fiber reinforced plastic cooling tower is: monotonic (low enthalpy) air is pumped by the fan and enters the cooling tower from the air inlet network; high temperature water molecules with high partial steam pressure and full steam move toward the air with low pressure, hot and humid (High enthalpy) water is sprinkled into the tower from the water-seeding system. When water droplets come into contact with air, on the one hand, because of the direct heat transfer between air and water, on the other hand, because of the pressure difference between the outside of the water vapor and the air, the phenomenon of steaming occurs under the infection of pressure, that is, through process and insufficiency. Dry air heat transfer takes away the sensible heat of the water, part of the water evaporates, and the latent heat in the water is removed, and then it reaches the purpose of cooling the cooling water.

(5) Demolding practice proves that in the process, the method is used to reduce the friction between the mold (title: the mother of industry) and the product, which has a great impact on the demolding of the glass fiber reinforced plastic open storage tank, and the mechanical demolding Mold is a proven method of demolding. Glass fiber reinforced plastic storage tanks use epoxy furan resin, modified or polyester resin, and phenolic resin as binders according to the medium used (storage or transportation). They are reinforced with a high resin content resistant lining, impervious layer, and fiber entanglement. Layer and outer protective layer.

Quanzhou Tianchi Glass Fiber Reinforced Plastics Co., Ltd. is headquartered in the birthplace of China Maritime Silk Road: Donghai Bay, Quanzhou City, Fujian Province, and has two production bases, which are located in Quanzhou and Fuzhou Mawei Industrial Zones. It is a high-tech environmental protection enterprise integrating R & D, production and sales of "FRP products". It is a large-scale manufacturer of FRP molded products in Fujian Province. Our main products are: FRP flower pots, FRP cable brackets, FRP septic tanks, FRP grills, FRP lawn manhole covers and other FRP products.